[China Glass Network] Back home after a busy day, I hope to have a quiet place, so whether it is a soundproof glass door or a soundproof glass window in home decoration, it is more and more important. So how to choose a soundproof glass door? What are the main points of noise isolation? Let’s take a look! Air Covered Yarn,Air Covering Yarn,Spandex Covering Yarn,Spandex Air Covering Yarn Shaoxing Shiffon Textile Co., Ltd , https://www.shiffontex.com
How to choose a soundproof glass door? What are the main points of noise isolation?
1, choose the soundproof glass
The sound insulation effect of the soundproof glass door depends mainly on the material of the soundproof glass. At present, the glass used for the soundproof glass door mainly has ordinary glass, hollow glass, multi-layer insulating glass and vacuum glass, among which the vacuum glass has better sound insulation effect. This is related to the structure of the glass: the vacuum glass separates the two pieces of glass and evacuates the air in the middle. A vacuum layer is formed between the glass, and the sound is soundproofed according to the principle that the sound cannot propagate in the vacuum, so no matter what kind of noise can not penetrate Pass the glass into the house. Relatively speaking, the insulating glass can only isolate high-frequency or low-energy noise. For low-frequency or high-energy noise, the sound insulation effect is not very good. The sound insulation effect of the multi-layer insulating glass is general, but the safety is high and it is not easy to be broken.
2, choose the glass door frame
Many people will ignore the sound insulation effect of the soundproof glass door and the door frame. If the sound insulation effect is taken from the perspective of the sound insulation effect, then the aluminum alloy door and the plastic steel door can be considered, but the ordinary aluminum alloy door has a relatively large sound when pulled, and the heat conduction is fast, and the sealing property is gradually reduced after long-term use, affecting the later stage. use. However, the aluminum alloy door is easy to install and the price is moderate. It attracts a lot of people. If you want the owner of the aluminum alloy door frame, you may wish to consider the new broken aluminum alloy door frame.
3, check the sealing performance
The sealing performance mainly refers to the degree of sealing of the door, and the sealing treatment of the glass and the frame are all part of the sealing performance. When inspecting, we can close the door and see the seal of the frame and the frame, and the sealing of the rear door and the wall. These factors are affecting the sealing performance of the soundproof glass door. The seal is determined by the higher or lower sealing degree. There are currently two types of sealing strips on the market: one is a wool seal and the other is a rubber seal. The wool seal and the rubber seal have their own shortcomings. The wool seal is easy to remove after a long time, which greatly reduces the sealing effect. The rubber sealing strip is easy to harden and age after being exposed to the sun, rain and rain, and also reduces the sealing effect. Regardless of the material, the seal should have sufficient tensile strength, elasticity and hardness. In addition, pay attention to check whether the sealing strip is flat, no curling, no grooving.
I hope this article can help you choose the right soundproof glass door, isolate noise pollution, and enjoy a quiet family life.
September 23, 2022