What are the gold-plated crafts of bronze Buddha statues? Copper Buddha statues are a common copper-carving crafts that can be seen frequently in some temples or other special places, and many Buddha statues are decorated with gold for aesthetics. What are the methods? The following is a brief explanation given by the Chinese copper sculpture industry network, I hope to be helpful to everyone. 1. Small copper Buddha statue with gold craft 1. Before the gold is attached, the surface of the Buddha image needs to be treated to ensure that it is dry, dust-free, free of oil and oil wax. If there are small holes in the surface of the Buddha statue, or uneven grooves, it should be covered with a primer. 2. After the paint is dried, use a fine sandpaper to gently polish the surface to a smooth surface. At the same time, repeatedly apply a high-strength adhesive and a penetrating primer to the surface of the Buddha image to ensure a long period of time. There will be no rust or other rust. 3. Apply the special glue evenly on the Buddha image, then attach the raw rice paper to the surface coated with glue, make the rice paper fully contact and absorb the glue, then use the tweezers to remove the rice paper and replace it with a new one. This is repeated 3 to 4 times until the glue has only a very thin layer left, and the gold can be officially started. 4. Gently pry the gold foil with tweezers and stick it on the surface of the Buddha image. Gently blow it with your mouth to make it flat. 5, when pasting, there are generally two people division of labor, one person posted, one person at the same time with a soft cotton cloth wrapped cotton gently tapped the already attached gold foil, so that it is fully compliant. After all the gold and gold supplements have to go through the process of 2 to 3 layers, it can ensure that the surface of the gold-plated surface is full and straight, without bottoming, and there is no flying gold on the surface. 6. Finally, after all the drying, spray three layers of special high-strength protective film, and paste the gold and you're done. Second, the large copper Buddha statue gold process 1. The golden Buddha statue is generally a large clay sculpture. In order to set off the gold, you need to have a yellow background on the surface of the Buddha image, and then a layer of tung oil on the surface. After drying a little, you can stick the gold foil. 2, the heat when drying is very important, to be appropriate. Too dry the gold foil can not be attached, too sticky gold foil deformation stickers are not smooth. This can be said to be a work done by experience. 3. After gently attaching the gold foil to the surface of the Buddha image, compact it with a brush and let the gold foil completely lie on the tung oil that is not completely dry. When the surface of the Buddha image is completely covered, it is basically completed. What are the gold- plating methods of bronze Buddha statues ? In response to this question, the small series of China Copper Sculpture Industry Network gives a detailed explanation, hoping to help everyone. The bronze Buddha statue is definitely a craft that tests the skill. If the nail is slightly hard, it can scrape off the gold foil on the surface of the Buddha image. Then it is definitely a “tofu slag projectâ€, and the real superb gold, even if you use it again. It is impossible to scrape a trace. So everyone is looking for a professional company when buying bronze Buddha statues. Beads And Pearl Embroidery Fabric Cloth Fabric Online,Fashion Fabric Store,Designer Clothing Fabric,Women'S Clothing Natural Fabrics SHAOXING YINFENG IMPORT AND EXPROT CO.,LTD , https://www.shaoxingyinfeng.com
February 10, 2023