Jewelry is a natural partner of women. It is a commonplace for the importance and necessity of women. Today we will not talk about it. Today, I want to talk about the vulnerable parts of jewelry. Because Xiaowei found that many women only buy jewelry, but do not know where to pay attention! Ear needle The ear pin is the most easily damaged part of the earring. Because the ear pin is mostly thin, deformation and breakage are common causes of earring repair. There are three ways to make ear pins, such as welding, bonding and screws. The ear pins of the welding series will be deformed and broken under external force such as extrusion. The acupuncture needles of the adhesive series are prone to loosening due to aging of the glue and fall from the root of the earrings. The long-term wear of the ear pins of the screw series will result in the silky imagination, which is not as stable as the welding. Grain In order to avoid monotony, precious metal jewellery will engrave petals on the surface, wear it for a long time, and the beautiful lines such as petals will be smoothed or even disappeared, losing its original appearance. Precious metal hardness The hardness of gold and silver is not high. The jewelry of precious metals often wears or rubs against hard objects during wear. Surface wear will occur. Some worn jewelry can be repaired by polishing and refurbishing. If there is serious 磕Injury requires gold plastic repair, which is a common service content for jewelry store maintenance. For metal jewelry, the deformation of rings and bracelets is related to the hardness of the jewelry itself. When contacting objects with higher hardness than jewelry, the problem of scratches and abrasions will aggravate the damage of the jewelry, affecting the appearance and wearing experience. Claw For jewellery inlaid with jewellery, the method of claw setting, bag setting and stuffing setting is more common. The fixing effect of the claw setting is good, but the claws are generally small, and the hardness of the material used is less than 5, after severe impact and touch. There will be loosening, the effect of fixing the gem will be greatly reduced, and the breakage of the claw setting should be promptly repaired to a professional organization to prevent the loss of the gemstone loss. Micro-stitch setting For jewellery with many small diamonds, it is generally set with micro-studs. The micro-stitching is generally a mosaic method in which the stones of the same size are densely and symmetrically set together, and the claws are fixed by mutual sharing. It is very popular among girls, but the micro-studded inserts are slender, and the collision and hooking may cause the claws to be deformed. The loosening of the claws will cause the problem of falling diamonds. It is necessary to make up the stones, and the diamonds for this kind of inlaid diamonds are repaired very much. common. Buckle Buckles are an essential part of bracelets and necklaces, and are the most vulnerable to damage and problems with bracelets and necklaces. At present, the common buckles on the market are divided into machine buckles, screw buckles, M buckles and S buckles, and lobster buckles. Different buckle shapes will have different weaknesses, but breakage, deformation, loss of elasticity, etc. are fatal of bracelets and necklaces. problem. The buckles are generally made of metal. It is very important to drag and squeeze and squeeze to affect the use effect. Maintenance tips: If you want to do the best in maintenance, you should store them in a careful and orderly manner when you are not wearing them. This will not only prevent them from touching each other, but also can easily separate them. Mutual influence, in order to achieve pleasing to the eye, improve the quality of life, this is the best choice for the maintenance of jewelry. 100% cotton dress, soft and comfortable SHAOXING LIDONG TRADING CO.,LTD , https://www.lidong-garment.com
Loose version, enlarged dimension design, free and comfortable
August 24, 2024